Description

KT***8B Pneumatic Multi-head Drills This equipment primarily is used for processing the through-hole or non-through-hole on the profiles of curtain wall and aluminum alloy. It may also used for the processing of industrial profiles and window profiles. Because of adopting the motor and the direct-ally style outputs of cylinder, as a result, drilling a hole more steady and the accuracy is high. This machine can pack to the head of clip-drill and the multi-head drills station, making drill a hole more convenient. MAIN TECHNIQUE PARAMETER 1.The quantity of power drill..................4~6 pieces 2.Worktable dimension..........................**0x**0mm 3.Max. distance of drilling head moves from front to rear.........*0mm 4.Max. distance of power drill moves from up to down..............**0mm 5.Drilling head rotation speed(power drill).......................***0r/min(drill alu) .............................***0r/min(drill iron) 6.Min. distance between each hole..............**5mm 7.Min. distance between single hole............*0~*2mm(power drill made in Taiwan) 8.Drilling head feeding speed..................0.1~0.2mm/r 9.Max. drill and cut hole diameter.............D*5mm(single hole) *0.Min. drill and cut hole diameter............D3mm *1.Max. processing aluminum profile end size...**0x**0mm *2.Max. processing aluminum profile length.....***0mm *3.Motor power.................................0.*5KWx4 *4.Motor rotation speed........................***0r/min *5.Weight......................................about ***0KG (The hole diameter size is changed as per the different power drill parameter which choosed by the customer)